Offset Documents By Job; Low Toner Alert Level - Kyocera TASKalfa 3551ci Operation Manual

Taskalfa 3051ci/3551ci/4551ci/5551ci operation guide rev-1 2013.6

Hide thumbs Also See for TASKalfa 3551ci:

Table of Contents

Setup and Registration (System Menu) > System Menu

Manual Staple

Common Settings

Only displayed when the optional 4,000-Sheet Finisher is installed.

Manual Staple

Staple Position

Offset Documents by Job

Common Settings

Offset Documents by Job

Common Settings

Low Toner Alert Level

Select whether to use Manual Staple.

Value: Off, On

If you selected [On], set the time until manual stapling mode is automatically cancelled. The

setting range is 5 to 60 seconds (in 5-second increments).

Set the default Staple Position.

Value: A4 Long Edge, Letter Long Edge

Select whether to offset documents by Job.

Value: Off, On

This function is displayed when an optional 1,000-Sheet Finisher or 4,000-Sheet Finisher is

Set the amount of remaining toner to alert low toner.

Value: Off, On

Selecting [Off] alerts you low toner when the amount of remaining toner becomes 5%.

If [On] is selected, set the amount of remaining toner to alert. The setting range is 5 to 100% (in

1% increments).

Show Quick Links

Table of Contents