Lan Interface; Restart Network - Kyocera TASKalfa 3551ci Operation Manual

Setup and Registration (System Menu) > System Menu
Item
HTTP
HTTPS
LDAP
SNMPv1/v2c
SNMPv3
Enhanced WSD
Enhanced WSD over SSL
*1 The setting will be changed after restarting the device or network.
*2 Set "SSL" to [On] in Security Settings on page
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Security Settings
Item
SSL

LAN Interface

Item
LAN Interface
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.

Restart Network

Item
Restart Network
Select whether to communicate using HTTP.
Value: Off, On
Select whether to communicate using HTTPS.
Value: Off, On
Select whether to use LDAP.
Value: Off, On
Select whether to communicate using SNMP.
Value: Off, On
Select whether to communicate using SNMPv3.
Value: Off, On
Select whether to use Enhanced WSD.
Value: Off, On
Select whether to use Enhanced WSD (SSL).
Value: Off, On
NOTE
Selecting [Off] will disable the functionality of WIA, TWAIN and Network FAX drivers.
8-46.
Select whether to use SSL for communication.
Value: Off, On
Specify the settings for the LAN interface to be used.
Value: Auto, 10BASE-T Half, 10BASE-T Full, 100BASE-T Half, 100BASE-TX Full, 1000BASE-T
Restarts the network.
8-46
Description
*1
*1, *2
*1
*1
*1
*1, *2
Description
Description
Description