Kyocera TASKalfa 3551ci Operation Manual page 298

Using Various Functions > Functions
Item
Border Erase Border
Sheet
Back Page
Border Erase Border
Book
Gutter
Back Page
Individual Border Top
Erase
Bottom
Left
Right
Back Page
Original
Orientation
* The input units can be changed in System Menu. For details, refer to
Value
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Same as Front Page, Do Not Erase
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Same as Front Page, Do Not Erase
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Same as Front Page, Do Not Erase
Top Edge on Top, Top Edge on Left
Measurement on page
6-40
Description
Set the border erase width.*
Set the value by pressing [+] or [-].
Press [# Keys] to use the numeric keys for
entry.
For 2-sided originals, press [Back Page] and
then press [Same as Front Page] or [Do Not
Erase].
Set the border erase width.*
Set the value by pressing [+] or [-].
Press [# Keys] to use the numeric keys for
entry.
For 2-sided originals, press [Back Page] and
then press [Same as Front Page] or [Do Not
Erase].
Set the border erase width.*
Set the value by pressing [+] or [-].
Press [# Keys] to use the numeric keys for
entry.
For 2-sided originals, press [Back Page] and
then press [Same as Front Page] or [Do Not
Erase].
Select the orientation of the original document
top edge to scan correct direction. Press
[Original Orientation] to choose orientation of
the originals, either [Top Edge on Top] or [Top
Edge on Left]. Then press [OK].
8-14.