Paper Output; Density - Kyocera TASKalfa 3551ci Operation Manual

Using Various Functions > Functions

Paper Output

Org./Paper/
Copy
Finishing
Specify the output tray.
Item
Inner Tray
Finisher Left Tray, Finisher Top Tray
Tray A, Tray B, Tray C
Right Tray
Job Separator
Tray 1 to 7
NOTE
• The setting for this function can be configured only when the optional job separator and/or document finisher
(1,000-Sheet Finisher or 4,000-Sheet Finisher) are installed.
• The default setting for Paper Output can be changed. For details, refer to
• When [Heavy 3] (164 g/m
the output destination is automatically changed to a tray that can be used.

Density

Color/
Copy
Image Quality
Adjust density using 7 or 13 levels.
Adjust density pressing [-3] (Lighter) to [+3] (Darker). You can change the density level
[-3] (Lighter) to [+3] (Darker) in half-steps.
Functions
Custom
Memory
Box
Inner tray of the machine (where copies are stored) (Can be selected when the optional
1,000-Sheet Finisher or 4,000-Sheet Finisher is not installed.)
Tray of the optional 1,000-Sheet Finisher
Trays A to C in the optional 4,000-Sheet Finisher
Optional right job separator
Optional inner job separator (Can be selected when the optional 1,000-Sheet Finisher or
4,000-Sheet Finisher is not installed.)
Trays 1 to 7 in the optional mailbox (tray 1 is the top tray)
2
-) or higher is set in Paper Weight and Mailbox (Option) is set for the output destination,
Color/
Custom
Send
Image Quality
USB Functions
Description
Functions Color/
Box Image Quality
6-22
Paper Output on page 8-16.
USB Functions
Memory
Color/
Image Quality