Adjustment/Maintenance - Kyocera TASKalfa 3551ci Operation Manual

Setup and Registration (System Menu) > System Menu

Adjustment/Maintenance

Adjustment/Maintenance

Adjust printing quality and conduct machine maintenance.
Item
Density Adjustment
Copy
Send/Box
FAX*
Background Density Adj.
Copy (Auto)
Send/Box (Auto)
Drum Refresh
Correcting Black Lines
System Initialization
Display Brightness
Silent Mode
Memory Diagnostics
* Displayed only when the optional FAX Kit is installed.
Adjust density.
Adjust copy density. Adjustment can be made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Adjust scan density when sending or storing the data in Document Box. Adjustment can be
made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
For details, refer to the FAX Operation Guide.
Darkens or lightens overall background density adjustment.
Darkens or lightens overall background density adjustment during copying. Adjustment can be
made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Darkens or lightens overall background density when sending images or storing them in the
Document Box. Adjustment can be made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Remove image blur and white dots from the printout. It takes 331 seconds on 3051ci, 282
seconds on 3551ci, 218 seconds on 4551ci, and 146 seconds on 5551ci.
For more information, refer to the
NOTE
Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is
done.
Correct fine lines (streaks caused by contamination), which may appear on the image, when
the document processor is used.
Value
Off: No correction performed.
On (Low): Correction performed. The reproduction of fine lines on the original may
become lighter than when using [Off].
On (High): Select this item if a streak remains after using [On (Low)]. The reproduction
of fine lines on the original may become lighter than when using [On (Low)].
Initialize the hard disk installed on the machine to return it to the factory defaults.
NOTE
This function will not be displayed when the optional Data Security Kit is activated.
Set the brightness of the touch panel.
Value: 1 (Darker), 2, 3, 4 (Lighter)
Makes the machine enter a sleep state immediately after printing to reduce operating sound.
Enable this setting if you find that the operating sound is unpleasant.
Value: Off, On
NOTE
When [On] is selected, it may take time for the next print job to start if the ambient temperature
is 17°C or less.
Perform this function to check the machine memory.
8-57
Description
Drum Refresh on page 10-42.