System Menu Settings; Cassette/Mp Tray Settings - Kyocera TASKalfa 3551ci Operation Manual

Setup and Registration (System Menu) > System Menu

System Menu Settings

This section explains the functions that can be configured in System Menu. To configure the settings, select the item in
System Menu and press the setting item. For details on each function, see the table below.
Item
Quick Setup Wizard

Cassette/MP Tray Settings

Cassette 1 (to 7)
MP Tray Setting
Common Settings
Language
Default Screen
Sound
Original/Paper Settings
Measurement
Error Handling
Paper Output
Orientation Confirmation
Color Toner Empty Action
Function Defaults
Keyboard Layout
System Stamp
Manual Staple
Offset Documents by Job
Low Toner Alert Level
Offset One Page Documents
Display Status/Log
Message Banner Print
Customize Status Display
Function Key Usage
Message Board Settings
Remote Printing
The Quick Setup Wizard configures Fax and Energy Saver settings.
Select paper size and media type for Cassettes and multi purpose tray.
Select type of paper in Cassette 1 (to 7).
Select type of paper in multi purpose tray.
Configure overall machine operation.
Select the language displayed on the touch panel.
Select the screen appearing right after start-up (default screen).
Set options for buzzer sound during the machine operations.
Configure settings for originals and paper.
Select inch or metric for the unit for paper dimensions.
Select whether to cancel or continue the job when error has occurred.
Select output tray respectively for copy jobs, print jobs from Document
Box, computers, and FAX RX data.
Check the orientation of original.
Select whether printing is prohibited or the Print in Black and White
setting is used for printing once the color toner runs out.
Defaults are the values automatically set after the warm-up is completed
or the [Reset] key is pressed.
Set the defaults for available settings such as copying and sending. Setting
the frequently-used values as defaults makes subsequent jobs easier.
IMPORTANT
If you want to enable the changed defaults immediately, move to the
function screen and press the [Reset] key.
Change the layout of the touch panel keyboard used to enter characters.
Configure settings for header, footer, and stamp.
Configure settings for manual staple.
Select whether to offset documents by Job.
Set the amount of remaining toner to alert low toner.
Set whether one-page documents are sorted.
Set the display method of the Status/Log.
Select whether the confirmation screen appears before each sheet is
printed when printing multiple banner sheets.
Select the item that appears for the printing jobs status.
Configure settings for function key on the touch panel.
Configure settings for message board.
Configure settings for remote printing.
8-4
Description
Reference
Page
page 2-28
page 8-7
page 8-7
page 8-7
page 8-9
page 8-9
page 8-9
page 8-9
page 8-10
page 8-14
page 8-14
page 8-16
page 8-16
page 8-16
page 8-17
page 8-20
page 8-20
page 8-24
page 8-24
page 8-24
page 8-25
page 8-25
page 8-25
page 8-26
page 8-26
page 8-27
page 8-27