System Menu Settings - Kyocera TASKalfa 6003i Operation Manual

Setup and Registration (System Menu) > System Menu

System Menu Settings

This section explains the functions that can be configured in System Menu. To configure the settings, select the item in
System Menu and select the setting item. For details on each function, see the table below.
Item
Quick Setup Wizard
Counter
Cassette/MP Tray Settings
Cassette 1 (to 5)
MP Tray Setting
Common Settings
Language
Default Screen
Sound
Keyboard Layout
Original/Paper Settings
Measurement
Error Handling
Paper Output
Orientation Confirmation
Function Defaults
Optional Keyboard Type
System Stamp
Manual Staple
Offset Documents by Job
Low Toner Alert Level
Toner Waste Full Alert
Offset One Page
Documents
The Quick Setup Wizard configures Fax, Network and Energy
Saver settings.
Check the number of sheets printed and scanned.
Select paper size and media type for Cassettes and multipurpose
tray.
Select type of paper in Cassette 1 (to 5).
Select type of paper in multipurpose tray.
Configure overall machine operation.
Set the language to use for the touch panel display.
Select the screen appearing right after start-up (default screen).
Set options for buzzer sound during the machine operations.
Change the layout of the touch panel keyboard used to enter
characters.
Configure settings for originals and paper.
Select inch or metric for the unit for paper dimensions.
Select whether to cancel or continue the job when error has
occurred.
Select the output tray respectively for copy jobs, print jobs from
Document Box, computers, and FAX RX data.
Check the orientation of original.
Defaults are the values automatically set after the warm-up is
completed or the [Reset] key is selected.
Set the defaults for available settings such as copying and sending.
Setting the frequently-used values as defaults makes subsequent
jobs easier.
Select the type of optional keyboard that you want to use.
Configure settings for header, footer, and stamp.
Select whether to use Manual Staple.
Select whether to offset documents by Job.
Set the amount of remaining toner to notify the administrator when
to order a toner when the toner is running low.
Set the capacity of the waste toner box for which you require
notification to be sent that the waste toner box is going to be full.
Set whether one-page documents are sorted.
8-4
Description
Reference
Page
page 2-43
page 2-59
page 8-7
page 8-7
page 8-8
page 8-10
page 8-10
page 8-10
page 8-10
page 8-11
page 8-11
page 8-15
page 8-16
page 8-18
page 8-19
page 8-19
page 8-23
page 8-23
page 8-29
page 8-29
page 8-30
page 8-30
page 8-30