Fax Settings - Dell C1765NFW User Manual

Fax Settings

Purpose:
To display the basic fax settings.
Values:
Receive Mode
Auto Rec Fax
Auto Rec Fax/Tel
Auto Rec Ans/Fax
Line Monitor
Ring Tone Volume
Line Type
Tone/Pulse
Resend Delay
Redial Attempts
Redial Delay
Junk Fax Setup
Remote Receive
Remote Rcv Tone
Fax Header
Fax Header Name
Fax Number
Fax Cover Page
DRPD Pattern
Sent Fax Fwd
Fax Fwd Number
Prefix Dial
Prefix Dial Num
Discard Size
ECM
Modem Speed
Fax Activity
Displays the fax receiving mode.
Displays the interval at which the printer goes into the fax receive mode after
receiving an incoming call.
Displays the interval at which the printer goes into the fax receive mode after the
external telephone receives an incoming call.
Displays the interval at which the printer goes into the fax receive mode after the
external answering machine receives an incoming call.
Displays the volume of the line monitor, which audibly monitors a transmission
through the internal speaker until a connection is made.
Displays the volume of the ring tone, which indicates that an incoming call is a
telephone call through the internal speaker when Receive Mode is set to
Telephone/Fax.
Displays the line type.
Displays the dialing type.
Displays the interval between transmission attempts.
Displays the number of redial attempts.
Displays the interval between redial attempts.
Displays whether to reject faxes sent from unwanted numbers.
Displays whether to receive faxes by pressing a remote receive code on the external
telephone.
Displays the remote receive code to start Remote Receive.
Displays whether to print the information of sender on the header of faxes.
Displays the name of sender to be printed on the header of faxes.
Displays the fax number to be printed on the header of faxes.
Displays whether to attach a cover page to faxes.
Displays the Distinctive Ring Pattern Detection (DRPD) setting.
Displays whether to forward incoming faxes to a specified destination.
Displays the fax number of the destination to which incoming faxes are to be
forwarded.
Displays whether to set a prefix dial number.
Displays a prefix dial number. This number dials before any auto dial number is
started.
Displays whether to discard text or images at the bottom of a fax page when the
entire page does not fit onto the output paper.
Displays whether to enable the Error Correction Mode (ECM).
Displays the fax modem speed when a fax transmission or reception error occurs.
Displays whether to automatically print a fax activity report after every 50
incoming and outgoing fax communications.
Understanding the Tool Box Menus
145