4
Configuring a RADIUS server
FIGURE 61
The NTP display contains the following information.
IP Address
Version
Add
Delete
Reset
Show
Configuring a RADIUS server
Select Configure > System > RADIUS to configure a RADIUS server. Click Apply to save your
configuration or click Reset. to undo changes.
80
NTP server information
The IP Address of the route's destination.
Displays the version of the NTP Server.
Allows you to add the IP Address.
Allows you to delete the changes made.
To undo your changes, click Reset.
Displays the NTP Server entries.
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01