Dell PowerConnect B-FCXs User Manual page 28

3
Monitoring stack details
Comment
Alone
D
S
The Stack Port Status includes the following information.
Unit ID
Stack-port1
Stack-port2
The Stack Neighbors includes the following information.
Unit ID
Stack-port1
Stack-port2
General Stacking Configuration
Configure Stack Priority
Configure Stack Port
Configure Stack Modules
18
Additional information about this unit.
Indicates the device is operating as a standalone device.
Dynamic configuration. The configuration for this unit is dynamic and may be
overwritten by a new stack unit. To change to a static configuration, enter the write
memory command.
Static configuration. The configuration for this unit is static (has been saved with a
write memory command).
Defines the number of the unit within the stack.
Indicates the port state and identifies the port by number
(stack-ID or slot or port). Port states are:
•
Up - Each end is connected.
•
Down - Port is configured as a stacking port, but not connected.
•
None - Port is not configured as a stacking port.
Indicates the port state and identifies the port by number
(stack-ID or slot or port). Port states are:
•
Up - Each end is connected.
•
Down - Port is configured as a stacking port, but not connected.
•
None - Port is not configured as a stacking port.
Defines the number of the unit within the stack.
Identifies the neighbor stack unit for stack-port1 for this unit ID.
Identifies the neighbor stack unit for stack-port2 for this unit ID.
Allows you to configure the general stacking configuration.
Allows you to configure the stack unit priority.
Allows you to configure the stack port.
Allows you to configure the stack modules.
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01