Configuring An Snmp Community String - Dell PowerConnect B-FCXs User Manual

Configuring an SNMP community string

Select Configure > System > Management > Community String to configure an SNMP community
string.
FIGURE 70
The SNMP Community String display contains the following information.
Type
Community String
Encrypt
View Name
ACL Id
Delete
Add Community String
Click Add to view the current configured SNMP Community String, as shown in
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01
Configuring an SNMP community string
Displays the type of login username and password.
Displays the username to open a web management session.
Specifies if encryption is enabled for a particular string.
Specifies the name of the community string.
This parameter identifies a collection of individual ACL entries.
Enables you to delete the community string.
Allows you to add a new community string.
Configuring a TACACS/TACACS+ server
4
Figure 71.
89