Dell PowerConnect B-FCXs User Manual page 57

The RMON Statistics contains the following information.
Port
Octets
Packets
Packets: Broadcast
Packets: Multicast
Octet Packets: 64
Octet Packets: 65 – 127
This number includes bad packets.
Octet Packets: 128 – 255
This number includes bad packets.
Octet Packets: 128 – 255
Octet Packets: 256 – 511
Octet Packets: 512 – 1023
Owner
Status
Clear
Stop Polling
Change Polling Interval
RMON Ethernet Error Statistics
Up Time
Last Clear Time
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01
Monitoring RMON statistics
Slot number or port number of the port for which the statistics are being
reported.
The total number of octets of data received on the network. This number
includes octets in bad packets. This number does not include framing bits
but does include Frame Check Sequence (FCS) octets.
The total number of packets received. This number includes bad packets,
broadcast packets, and multicast packets.
The total number of good packets received that were directed to the
broadcast address. This number does not include multicast packets.
The total number of good packets received that were directed to a
multicast address. This number does not include packets directed to the
broadcast address.
The total number of packets received that were 64 octets long. This
number includes bad packets. This number does not include framing bits
but does include FCS octets.
The total number of packets received that were 65 – 127 octets long.
This number does not include framing bits but does include FCS octets.
The total number of packets received that were 65 – 127 octets long.
This number does not include framing bits but does include FCS octets.
The total number of packets received that were 128 – 255 octets long.
This number includes bad packets. This number does not include framing
bits but does include FCS octets.
The total number of packets received that were 128 – 255 octets long.
This number includes bad packets. This number does not include framing
bits but does include FCS octets.
The total number of packets received that were 1024 – 1518 octets long.
This number includes bad packets. This number does not include framing
bits but does include FCS octets.
The owner of the packets.
Status of the port.
Removes the data currently in the table and restarts monitoring.
Stops reporting the statistics.
Allows you to change the current polling interval.
Shows the error statistics table.
The length of time the device has been available.
The length of time data has been accumulating in the current table.
3
47