Dell PowerConnect B-FCXs User Manual page 113

The Ethernet Port Configuration display contains the following information.
Port
Actual Speed/Mode
Configured Speed/Mode
QOS
Lock Addr
Tag
STP
Fast STP
Fast Uplink
Flow Ctrl
Gig Default
Ethernet Port Attribute
Ethernet Port Statistic
Ethernet Port Utilization
Relative Utilization
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01
The slot ID and port ID.
Shows whether the Actual speed matches the Configured speed. If the Configured
speed is set to Auto, then the speed is provided.
The speed duplex set for the port.
Shows the setting (1-7) for Quality of Service.
Shows whether a Lock Address is Enabled or Disabled.
Indicates whether the ports have VLAN tagging. The value is Yes or No.
Shows whether STP is Enabled or Disabled for the port.
Shows whether Fast STP is Enabled or Disabled for the port.
Shows whether Fast Uplink is Enabled or Disabled for the port.
Shows whether the ability to monitor flow control packets is Enabled or Disabled.
The globally configured Gigabit negotiation mode is the default mode for all Gigabit
fiber ports. You can override the globally configured default and set individual ports
to the following:
•
Negotiate-full-auto – The port first tries to perform a handshake with the other
port to exchange capability information. If the other port does not respond to
the handshake attempt, the port uses the manually configured configuration
information (or the defaults if an administrator has not set the information).
This is the default.
•
Auto-Gigabit – The port tries to perform a handshake with the other port to
exchange capability information.
•
Negotiation-off – The port does not try to perform a handshake. Instead, the
port uses configuration information manually configured by an administrator.
Allows you to monitor the port attributes.
Allows you to monitor the Ethernet port statistic details.
Allows you to monitor the Ethernet port utilization details.
Allows you to configure the uplink and downlink port members.
Configuring an Ethernet port
4
103