Dell PowerConnect B-FCXs User Manual page 77

FIGURE 50
The standard ACL display contains the following information.
Standard ACL Number
Action
IP Address
Filter Mask
Host Name
Log
Add
Delete
Reset
Show ACLs
Name ACLs
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01
Configuring a standard ACL
Displays the Standard Access Control List number.
The action the router takes if a RIP route packet matches the IP address and
subnet mask of the filter. The action can be one of the following:
•
deny – The ACL will deny (drop) packets that match a policy in the access list.
•
permit – The ACL will permit (forward) packets that match a policy in the access
list.
The IP Address of the route's destination.
Allows you to specify a range of IP addresses to include or exclude based on mask
matching.
Enables you to perform Telnet, ping and tracer route commands.
Allows you to select if you want to log the entries.
Allows you to add the Standard ACL Number.
Allows you to delete the changes made.
To undo your changes, click Reset.
Displays the standard ACL information.
Clicking on this parameter allows you to enter the ACL Name
Configuring a standard ACL
4
67