Dell PowerConnect B-FCXs User Manual page 88

4
Configuring a system module
The table shows the following information.
Unit Id:Module
Slot
Module
Status
Ports
Starting MAC
Add Module
FIGURE 59
The Module display contains the following information.
Slot
Module Type
Add
Delete
Reset
Show
78
Displays the Unit Id of the management module.
The Interface module / slot number.
Identifies the module, by stack unit ID, module number, module type
Displays the status of this module.
Displays the number of ports in this module.
The starting MAC address for this module
Click Add Module to add a management module, as shown in
Adding system module
The Interface module / slot number.
Identifies the module type.
Allows you to add the MAC Addresses.
Allows you to delete the changes made.
To undo your changes, click Reset.
Displays the added module details.
PowerConnect B-Series FCX Web Management Interface User Guide
Figure 59.
53-1002268-01