Configuring Stp - Dell PowerConnect B-FCXs User Manual
Web management interface user guide
Hide thumbs
Also See for PowerConnect B-FCXs:
- Hardware installation manual (86 pages) ,
- Getting started manual (260 pages) ,
- Configuration manual (1494 pages)
Table of Contents
Advertisement
4
Configuring STP
The IPX network window contains the following information.
Protocol_VLAN_Name
Frame Type
Network
Selected Port Members
Configuring STP
Select Configure > STP to configure the STP bridge.
120
Enter the name of the protocol VLAN.
Enter the frame type of the protocol.
IPX network must be between 0x00000001 to 0xFFFFFFFE.
Displays the selected port members under the static port and exclude port.
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01
Advertisement
Table of Contents
