Dell PowerConnect B-FCXs User Manual page 83

Destination Address
Destination Mask
Frame type
Operator
Protocol
System Define
Add
Modify
Delete
Show
Filter Group
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01
The destination identification number in the IP.
This is a network mask applied to the destination address. It is specified as a 32-bit IP
address in dotted decimal format. The destination-mask attribute apples to all
protocols.
The Frame type can be any one of the following:
•
none
•
ethernet
•
llc
•
snap
The comparison operator for TCP or UDP port names or numbers.
NOTE: This field applies only if the IP protocol is TCP or UDP.
The IP protocol can be one of the following well-known names or any IP protocol number
from 0 – 255.
•
Internet Control Message Protocol (ICMP)
•
Internet Group Management Protocol (IGMP)
•
Internet Gateway Routing Protocol (IGRP)
•
Internet Protocol (IP)
•
Open Shortest Path First (OSPF)
•
Transmission Control Protocol (TCP)
•
User Datagram Protocol (UDP)
Displays the system defined protocol.
Allows you to add the MAC Addresses.
Allows you to modify the changes made.
Allows you to delete the changes made.
Click Show to see the current MAC Filter configuration.
Click Filter Group to see information about a specific MAC Filter group, as shown in
Figure 55.
Configuring the system MAC filter
4
73