4
Configuring stack ports
Modifying stack ports
Click Configure > Stack > Stack Ports > Modify to modify the configuration of the stack ports.
Configure the stack ports and Click Apply.
FIGURE 36
The configurable options include the following.
Unit ID
Stack-port1
Stack-port2
Click Show Stack-Ports to view the details of selected stack ports as shown below.
54
Modifying stack ports
The stack identification number for this unit.
Identifies the port by number (stack-ID or slot or port).
Identifies the port by number (stack-ID or slot or port).
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01