Dell PowerConnect B-FCXs User Manual page 139

Force Migration Check
Priority
Path Cost
Port
Click Statistic to display the details of RSTP statistic as shown in
FIGURE 106
The RSTP statistic display contains the following information.
RSTP Bridge Parameters
Vlan
RootBridge ID
RootBridge PathCost
DesignateBridge ID
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01
The force-migration-check parameter forces the specified port to sent one RST
BPDU. If only STP BPDUs are received in response to the sent RST BPDU, then the
port will go return to sending STP BPDUs.
The configured priority of the port. The default is 128 or 0x80.
The configured path cost on a link connected to this port.
ID of the port in slot#/port#format.
RSTP Statistic
The port-based VLAN that owns the STP instance. VLAN 1 is the default
VLAN. If you have not configured port-based VLANs on this device, all
802.1W information is for VLAN 1.
The ID assigned by STP to the root bridge for this spanning tree.
The cumulative cost from this bridge to the root bridge. If this device is the root
bridge, then the root cost is 0.
The bridge from where the root information was received.It can be from the root
bridge itself, but it could also be from another bridge.
Configuring RSTP
Figure 106
4
129