4
Configuring an extended ACL
Click Show ACL to open the Standard ACL display.
FIGURE 51
The Standard ACL display contains the following information.
#/Name
Action
Source
Mask
Log
Add Standard ACL
Configuring an extended ACL
Select Configure > System > Extended ACL to configure an extended ACL.
68
Standard ACL
Displays the name of the Standard ACL.
The action the router takes if a RIP route packet matches the IP address and
subnet mask of the filter. The action can be one of the following:
•
deny – The ACL will deny (drop) packets that match a policy in the access list.
•
permit – The ACL will permit (forward) packets that match a policy in the access list.
Identifies the source list that will be included or excluded on the interface.
This parameter provides a filter for displaying multiple MAC addresses that have specific
values in common.
Allows you to select if you want to log the entries.
Allows you to add another standard ACL.
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01