Dell PowerConnect B-FCXs User Manual page 151

The TFTP Configuration contains the following information.
TFTP Server ID
Configuration File Name
The options for creating and saving the TFTP configuration includes:
•
•
•
Select Command > TFTP > Image to access the TFTP Image configuration.
FIGURE 118
The TFTP image display contains the following information.
TFTP Server ID
Image File Name
Flash
The options for creating and saving the TFTP image include:
•
•
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01
The IP address of the most-recently contacted TFTP server, if the switch has contacted
a TFTP server since the last time the software was reloaded or the switch was
rebooted.
The name under which the Layer 2 Switch's startup-config file was uploaded or
downloaded during the most recent TFTP access.
Copy from Server to Flash
Copy from Flash to Server
Save from RAM to Server
Command - TFTP Image
The IP address of the most-recently contacted TFTP server, if the switch has contacted a
TFTP server since the last time the software was reloaded or the switch was rebooted.
The name of the Layer 2 Switch flash image (system software file) that was uploaded or
downloaded during the most recent TFTP access.
Primary flash is the default local storage device for image files and configuration files.
Secondary flash is a second flash storage device you can use to store redundant images for
additional booting reliability or to preserve one software image while testing another one.
Copy from Server
Save to Server
5
Using TFTP
141