Dell PowerConnect B-FCXs User Manual page 107

Encryption
Security Model
Security Level
Add Trap Receiver
Click Add Trap Receiver to add and configure a new trap receiver, as shown in
FIGURE 78
The Trap Receiver display contains the following information.
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01
The encryption method used for the connection. This can be IDEA,
ARCFOUR, DES, 3DES, AES, or BLOWFISH.
Used to secure against the following threats:
•
Modification of information.
•
Masquerading the identity of an authorized entity.
•
Message stream modification.
•
Disclosure of information.
The value for security level can be one of the following:
•
none - If the security model shows v1 or v2, then security level is blank. User
names are not used to authenticate users; community strings are used instead.
•
noauthNoPriv - Displays if the security model shows v3 and user authentication
is by user name only.
•
noauthNoPriv - Displays if the security model shows v3 and user authentication
is by user name and the MD5 or SHA algorithm.
Allows you to add new Trap Receivers.
Add a new trap receiver
Configuring a TACACS/TACACS+ server
4
Figure 78.
97