Dell PowerConnect B-FCXs User Manual page 105

FIGURE 76
The Trap display contains the following information.
SNMP Authentication
Power Supply
Fan
Cold Start
Link Up
Link Down
STP New Root
STP Topology Change
Locked Address Violation
Module Inserted
Module Removed
VSRP
Temperature warning
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01
Configuring a trap
Allows you to enable or disable SNMP Authentication.
Allows you to enable or disable Power Supply.
Allows you to enable or disable Fan.
Allows you to enable or disable Cold Start.
Allows you to enable or disable Link Up.
Allows you to enable or disable Link Down.
Allows you to enable or disable STP New Root.
Allows you to enable or disable STP Topology Change.
Allows you to enable or disable Locked Address Violation.
Allows you to enable or disable Module Inserted.
Allows you to enable or disable Module Removed.
Allows you to enable or disable VSRP.
Allows you to enable or disable Temperature warning.
Configuring a TACACS/TACACS+ server
4
95