Dell PowerConnect B-FCXs User Manual page 126

4
Configuring VLAN
Protocol_VLAN_Name
Protocol Type
Selected Port Members
Change Static members
Change Exclude members
Clear
Add
Modify
Delete
Reset
Show
Protocol
IP Subnet
FIGURE 95
Click Change Static Members to view the Static port members as shown in
116
Enter the name of the Protocol VLAN.
Select a protocol type.
Displays the selected port members under the static port and exclude port.
Allows you to select the static port members.
Allows you to select the exclude port members.
Allows you to unselect the selected port members.
Enables you to add the protocol types.
Enables you to modify the changes.
Enables you to delete the added protocol types.
To undo your changes, click Reset.
Displays the Protocol VLAN entries.
Displays the VLAN protocol.
Displays the IP Address and mask for VLAN protocol.
Adding Protocol type
PowerConnect B-Series FCX Web Management Interface User Guide
Figure 96.
53-1002268-01