Configuring A Trap - Dell PowerConnect B-FCXs User Manual

4
Configuring a TACACS/TACACS+ server
FIGURE 75
The System Log Server display contains the following information.
Server IP Address
Server Udp Port
Add
Delete
Reset
Show Log Server
Show System Log

Configuring a trap

Select Configure > System > Management > Trap to configure a trap. Click Apply to save the
configuration or click Reset to undo changes.
94
Add a Log Server
Displays the IP address of IPv4 or IPv6.
This parameter specifies the application port used for the Syslog facility. The default is
514.
Allows you to add the server IP Address.
Allows you to delete the changes made.
To undo your changes, click Reset.
Displays the Log Server entries.
Clicking this displays the default screen of the system log.
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01