4
Configuring a TACACS/TACACS+ server
FIGURE 65
The TACACS Server display contains the following information.
IP Address
Auth Port
Usage
Add
Delete
Reset
Show
Configuring management authentication
Select Configure > System > Management > Authentication methods to configure management
authentication.
84
TACACS/TACACS+ Server Information
The IP Address of the destination for the route.
This parameter specifies the UDP (for TACACS) or TCP (for TACACS+) port number of the
authentication port on the server.
Enables the server to be used in any of the four modes:
•
Authentication-only
•
Authorization-only
•
Accounting-only
•
Any AAA operation
Allows you to add the IP Address.
Allows you to delete the changes made.
To undo your changes, click Reset.
Displays the TACACS server entries.
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01