FIGURE 101
The STP Bridge and Port contains the following information.
STP Bridge Parameters
Priority
Max.Age
Hello Time
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01
Configuring the STP bridge
The preference that STP gives this port relative to other ports for forwarding traffic out
of the spanning tree. A higher numerical value means a lower priority.
The number of seconds this device or VLAN waits for a hello message from the root
bridge before deciding the root has become unavailable and performing a
reconvergence.
The interval between each configuration BPDU sent by the root bridge.
4
Configuring STP
121