Configuring Static Station - Dell PowerConnect B-FCXs User Manual

Delete
Reset
Show
Add Trunk

Configuring static station

Select Configure > Static Station to configure static station.
FIGURE 109
The static station display contains the following information.
MAC Address
Vlan ID
Port
QOS
Type
Add
Modify
Delete
Reset
Show
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01
Enables you to delete the added port members.
To undo your changes, click Reset.
Display the Trunk entries.
Allows you to add new ports.
Configuring the static station
The MAC address of the device.
Enables you to select a Vlan ID. This Vlan ID field is disabled if no port was configured.
The port number.
The QoS attribute specifies the priority of the incoming traffic based on any value between
0 (lowest priority) and 7 (highest priority). Default is 0.
Specifies the type of the device; host or route
Enables you to add the MAC Address.
Enables you to modify the changes.
Enables you to delete the changes made.
To undo your changes, click Reset.
Displays the static station table entries.

Configuring static station

4
133