4
Configuring the system DHCP gateway
Configuring the system DHCP gateway
Select Configure > System > DHCP Gateway to configure a system DHCP gateway.
FIGURE 43
The DHCP gateway contains the following information.
Unit ID
IP List
Add
Modify
Delete
Reset
Click Add after entering the values for Unit ID and IP to display the added information in the DHCP
Gateway list.
60
Configuring system DHCP gateway
The stack identification number for this unit.
Displays the list of IP addresses.
Enables you to add Unit ID.
Enables you to modify, if any.
Enables you to delete the changes made.
To undo your changes, click Reset.
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01