Monitoring Flash Information - Dell PowerConnect B-FCXs User Manual

3

Monitoring flash information

Temperature
CPU Utilization
Serial Number
Power Supply 1
Power Supply 2
Fan
(There is an entry for
each fan in the device)

Monitoring flash information

Stacking system behavior is defined by the runtime configuration, which is stored in a flash file
called startup-config.txt. During bootup, the system reads and applies the startup-config.txt file to
the runtime configuration.
Select Monitor > Flash, to view the flash information.
FIGURE 9
The Flash Information window contains the following information.
10
In addition to the actual temperature, the color of the degrees provides a visual
indicator for the device:
•
Green – The temperature is within the normal operating range.
•
Orange – The temperature has reached the warning level.
•
Red – The temperature has reached the shutdown level.
Percentage of CPU being used by the device.
The serial number of the device.
The status of the primary power supply.
The status of the secondary power supply, if present.
The status of the cooling fans.
Monitoring the flash Information
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01