State Of Data; Reference Documents - Intel BX80569Q9550 - Core 2 Quad 2.83 GHz Processor Datasheet

Introduction
address or data), the '_N' notation implies that the signal is inverted. For example,
D[3:0] = 'HLHL' refers to a Hex 'A', and D [3:0] _N = 'LHLH' also refers to a Hex 'A' (H
= High logic level, L = Low logic level).
A signal name has all capitalized letters, for example, VCTERM.
A symbol referring to a voltage level, current level, or a time value carries a plain
subscript, for example, Vccio, or a capitalized abbreviated subscript, for example, TCO.
1.7

State of Data

The data contained in this document is subject to change. It is the best information
that Intel is able to provide at the publication date of this document.
1.8

Reference Documents

The reader of this specification should also be familiar with material and concepts
presented in the following documents:
®
Intel Itanium
®
Intel Itanium
Application Architecture
®
Intel Itanium
Architecture
®
Intel Itanium
Volume 3: Instruction Set Reference
®
Intel Itanium
Volume 4: IA-32 Instruction Set Reference
®
Intel Itanium
Development and Optimization
®
Intel Itanium
Development and Optimization
®
Intel Itanium
®
Intel Itanium
Series Platform Design Guide
System Management Bus (SMBus) Specification
Note: Contact your Intel representative or check http://developer.intel.com for the latest
revision of the reference documents.
® ®
Intel Itanium Processor 9300 Series and 9500 Series Datasheet
Document Name
®
Processor 9300 Series and 9500 Series Specification Update
®
Architecture Software Developer's Manual, Volume 1:
®
Architecture Software Developer's Manual, Volume 2: System
®
Architecture Software Developer's Manual,
®
Architecture Software Developer's Manual,
®
9300 Series Processor Reference Manual for Software
®
9500 Series Processor Reference Manual for Software
®
Processor Family System Abstraction Layer Specification
®
Processor 9300 Series and Intel
® ®
Itanium Processor 9500
§
21