Intel BX80569Q9550 - Core 2 Quad 2.83 GHz Processor Datasheet page 14

Intel itanium processor quad-core 1.86-1.73 ghz with 24 mb l3 cache 9350, intel itanium processor quad-core 1.73-1.60 ghz with 20 mb l3 cache 9340, intel itanium processor quad-core 1.60-1.46 ghz with 20 mb l3 cache 9330, intel itanium processor quad-core
Hide thumbs Also See for BX80569Q9550 - Core 2 Quad 2.83 GHz Processor:
Table of Contents

Advertisement

The Intel
reliability, performance, and cost-effective scalability for your most data-intensive
business and technical applications.
The Intel
cache, Hyper-Threading Technology for increased performance, Intel
Technology for improved virtualization, Intel
availability. Intel
®
Itanium
deliver a higher processor frequency at all times, for maximum performance on all
workloads. The result is a higher thermal envelope utilization for more overall
performance. The Intel
covered by ECC including the large LLC utilizing double correct/triple detect (DECTED)
and protecting the MLI/MLD with in-line single correct/double detect (SECDED). In
addition, the processor provides extensive parity protection and parity interleaving on
nearly all RFs, end-to-end parity protection with recovery-support on all critical internal
buses and data paths including the ring. Residue protection on Floating Point unit,
along with the adoption of radiation-hardened (RAD) sequential latching elements for
vulnerable architectural and state. The Intel
processor interfaces exclusively with the Ararat II Voltage Regulator Module.
The Intel
system interface unit. Each processor core provides a 12-wide, 11-stage deep
execution pipeline. The resources consist of six integer units, one integer multiply unit,
four multimedia units, two load/store units, three branch units and two floating-point
units each capable of extended, double and single precision arithmetic. The hardware
employs dynamic prefetch, branch prediction, a register scoreboard, and non-blocking
caches to optimize for compile-time non-determinism. 32 additional stacked general
registers are provided over the Intel
support is provided for denormal, unnormal, and pseudo-normal operands for floating
point software assist offloading.
New instructions on the Intel
They include: clz (count leading zeros), mpy4 and mpyshl4(unsigned integer multiply/
shift and multiply), mov-to-DAHR/mv-from-DAHR (for improved MLD/FLD prefetcher
hinting and performance), and hint@priority (used by the processor to temporarily
allocate more resources to a thread). Advanced Explicitly Parallel Instruction
Computing (EPIC) is enhanced on the Intel
increasing the capacity of retiring instructions per cycle from 6 to a maximum of 12
instructions per cycle per core.
®
Intel
Hyper-threading Technology is enhanced in the Intel
Series with dual domain multithreading, which enables independent front-end and
back-end pipeline execution to improve multi-thread efficiency and performance for
both new and legacy applications. It provides hardware support for two threads per
core, with a threaded 96 entry per thread Instruction Buffer and threaded MLDTLB and
FLDTLB, and a dedicated load return path from the MLD to the integer register file.
Three levels of on-die cache minimize overall memory latency, with 16 KB instruction
cache FLI/16 KB write-through data cache FLD that comprise the FLC and 512 KB MLI/
256 KB writeback data cache MLD that comprise the MLC.
The Intel
Instruction Replay Technology. Pipeline replay resolves stall conditions that occur when
the microprocessor pipeline encounters a resource hazard that prevents immediate
execution. In a replay, the instruction that encountered the resource hazard is removed
from the pipeline, along with all the instructions that come after it. The instruction is
then read again out of the instruction buffer for replay and re-executed. To ensure a
14
®
®
Itanium
Processor 9500 Series delivers increased levels of flexibility,
®
®
Itanium
Processor 9500 Series processor provides up to 32 megabytes LLC
®
Turbo Boost Technology, featuring sustained boost. The Intel
Processor 9500 Series employs advanced power monitoring and control to
®
Itanium
®
®
Itanium
Processor 9500 Series consists of up to 8 core processors and a
®
Itanium
®
®
Itanium
Processor 9500 Series offers a new RAS feature: Intel
®
Cache Safe Technology for increased
®
Processor 9500 Series offers large cache arrays
®
®
Itanium
®
®
Itanium
Processor 9300 Series, and hardware
®
Processor 9500 Series simplify common tasks.
®
®
Itanium
Processor 9500 Series by
®
®
Intel
Itanium
Processor 9300 Series and 9500 Series Datasheet
Introduction
®
Virtualization
Processor 9500 Series
®
®
Itanium
Processor 9500
®
®

Advertisement

Table of Contents
loading

This manual is also suitable for:

Itanium 9300 seriesItanium 9500 series

Table of Contents