Cbus Cable Delay - Agilent Technologies E5071C Compliance Tests

Agilent MOI for MHL Cables Compliance Tests
Table 5-2 Common-mode Characteristic Impedance Limit
MHL Clock Common-mode Impedance
*1. Connection point and transition area, up to 3 ns distance. A single excursion is
permitted out to 20-40 ohms, no wider than 500 ps.
*2. Cable area, from 3 ns to 4 ns distance.

5.4.5. CBUS Cable Delay

1. Connect DUT (Figure 5-2).
Figure 5-2. CBUS Cable Delay Test Setup
2. Select Trace 5.
3. Press Stop Single.
4. Click Auto Scale
and select "X" for auto scaling the x-axis.
Min Max Unit
24 36 Ohm
25 35 Ohm
18
Note
*1
*2