Revision History; Purpose; References; Required Equipments - Agilent Technologies E5071C Compliance Tests

Agilent MOI for MHL Cables Compliance Tests

1. Revision History

Revision Comments
1.00 Initial Revision.

2. Purpose

This test procedure was written to explain how to use the Agilent ENA Option TDR to
make the cable measurements required per MHL (Mobile High-definition Link)
Specification Version 2.0.

3. References

 MHL (Mobile High-definition Link) Specification Version 2.0 (Feb. 2012)
 MHL (Mobile High-definition Link) Compliance Test Specification Revision 2.0 (Sep.
2012)

4. Required Equipments

1. E5071C ENA Series Network Analyzer
 Option 480 or 485 (8.5 GHz) / 4D5 (14 GHz) / 4K5 (20 GHz)
 Option TDR (Enhanced time domain analysis)
2. Test Fixture
 Wilder Technologies MHL-TPA-R-WOC (Source)
 Wilder Technologies MHL-TPA-R-WOSI (Sink)
3. 4-port ECal Module
 N4431B (for E5071C-480 or 485)
 N4433A (for E5071C-4D5 or 4K5)
4. Coaxial RF cables
5. 50 Ohm terminators (ex. Agilent 909D-301)
4
Issue Date
Feb. 15, 2013