Saving A State File - Agilent Technologies E5071C Compliance Tests

Agilent MOI for MHL Cables Compliance Tests
measurements by using the soft key on the right side of the screen or hard key on the front
panel.

5.2.2. Saving a State File

All the measurement settings including calibration information can be saved in a state file
(*.tdr). After performing calibration, all necessary calibration coefficients are saved in a
state file and can be recalled for the next measurements.
1. Press Save/Recall > Save Type and select State & Cal as a state file type.
2. Click File of the TDR software.
3. Select "Save State".
4. Enter file name and save the state file with calibration information
8