Defining Limit Line Tables - Agilent Technologies E5071C Compliance Tests

Agilent MOI for MHL Cables Compliance Tests
4. Press Display
-1/(2*PI*xAxis*im(50*(1+S11)/(1-S11)))".
5. Check Enabled to enable the equation on trace.
6. Click Apply.
7. Click Close.
8. Press Scale > Set Scale/Div to 100 pU/div.
9. Press Scale > Set Reference Value to -300 pU.

6.14. Defining Limit Line Tables

1. Press Trace Next
2. Press Analysis > Limit Line and turn it ON to display limit lines.
3. Press Analysis > Edit Limit Line to edit the limit line table.
4. Press Analysis > Limit Test and turn it ON.
5. Press Analysis > Limit Test > Fail Sign to switch the fail sign ON/OFF. When turned
on, the Fail sign is displayed on the E5071C's screen, if one or more failed traces are
within the channel.
6. Press System > Misc Setup > Beeper > Beep Warning to turn ON/OFF the warning
beeper.
> Equation Editor...
to select trace to set the limit line table.
> Enter
35
"Cs
an equation =