Tst; Wai - HP E1340A User Manual

*TST?

*TST?
Comments

*WAI

Comments
196 HP E1340A Command Reference
*TST? causes the E1340A to execute its internal self-test and returns a
value indicating the results of the test. The test includes only a test of the
command module-to-card microprocessor communications.
A zero response indicates that the self-test passed. Any non-zero reponse
indicates that the test failed. See the HP E1340A service manual for
information on interpreting non-zero self-test responses.
The settings for all SCPI commands are unchanged by this command.
Executable when initiated: No
Coupled command: No
*RST Condition: none
*WAI causes the E1340A to wait for all pending operations to complete
before executing any further commands.
If
STATus:OPC:INITiate OFF
commands received prior to the
*WAI waits for waveform generation to complete before resuming command
execution.
Executable when initiated: Yes
Coupled command: No
Related commands:
*RST Condition: none
is set, command execution resumes when all
have been executed. If
*WAI
*OPC, *OPC?
is set,
ON
Chapter 7