Operation |Questionable [:Event]; Operation |Questionable :Ntransition; [:Event]; Ntransition - HP E1340A User Manual

:OPERation
|QUEStionable

[:EVENt]?

Comments
Example
:OPERation
|QUEStionable

:NTRansition

Parameters
Comments
Example
Chapter 7
STATus:OPERation|QUEStionable[:EVENt]?
appropriate Event Register. Reading the register clears it to 0.
Both Event Registers are also cleared to 0 by the
command.
Executable when initiated: Yes
Coupling group: none
Related commands:
*RST Condition: unaffected
Power-on Condition: Both Event Registers are cleared to 0.
Querying the Operation Event Register
STAT:EVEN?
STATus:OPERation|QUEStionable:NTRansition <
negative transition mask. For each bit unmasked, a 1-to-0 transition of that
bit in the associated Condition Register will set the same bit in the
associated Event Register.
Parameter Parameter
Name Type
unmask
numeric or
non-decimal
numeric
The non-decimal numeric forms are the #H, #Q, or #B formats specified by
IEEE-488.2.
Executable when initiated: Yes
Coupling group: none
Related commands:
*RST Condition: unaffected
Power-on Condition:
STATUS:OPERation|QUEStionable:NTRansition 0
Setting the Operation Register negative transition mask
STAT:OPER:NTR #H0008
STATus:OPERation |QUEStionable [:EVENt]?
returns the contents of the
,
STATus subsystem *SRE
Query Operation Event Register
Range of
Values
0 through +32767
STATus subsystem , *SRE
Set event bit when sweeping
condition is cleared
HP E1340A Command Reference
*CLS common
,
*STB?
unmask sets the
>
Default
Units
none
, *STB?
183