Table of Contents
Advertisement
Chapter 3
6. Select the Waveform Segment -
[SOURce:]LIST[:SEGMent]:SELect <
Use either A, B, C, or D in
7. Store the Waveform Segment as Voltages -
[SOURce:]LIST[:SEGMent]:VOLTage <
This command stores the points of the waveform segment into the
AFG's segment memory. These points are sent to the AFG as volts
which are the output voltage points that constitutes the waveform
segment.
8. Select the User Name -
[SOURce:]FUNCtion:USER <
This command selects the waveform segment to be output. Make the
name in this command the same name as the waveform segment to be
output.
9. Initiate the Waveform -
INITiate[:IMMediate]
This command generates an immediate output with the arm source
set to
. Refer to Chapter 5 for triggering information.
IMMediate
10. Query the Waveform Segment (Optional) -
[SOURce:]LIST[:SEGment]:SELect?
This command returns the currently selected waveform segment.
Generating Arbitrary Waveforms with the HP E1340A
name
>
<
name
>
for the waveform segment.
voltage_list
>
name
>
60
Advertisement
Table of Contents
