Center; [:Cw|:Fixed] - HP E1340A User Manual

:CENTer

Parameters
Comments
Example

[:CW|:FIXed]

Parameters
Comments
Example
Chapter 7
[SOURce:]FREQuency:CENTer <
for a frequency-swept waveform.
Parameter Parameter
Name Type
center_freq
numeric
center_freq
The legal range for
are context-dependent. See the section "Coupling Rules" at the beginning of
the SOURce:FREQuency subsystem for a description of the coupling between
STARt, STOP, CENTer, and SPAN.
Executable when initiated: Query form only
Coupled command: Yes
Related Commands:
and ,
STOP SOURce:FUNCtion:SHAPe
*RST Condition:
Setting the center frequency
FREQ:CENT 1E3
[SOURce:]FREQuency[:CW|:FIXed] <
waveform frequency.
Parameter Parameter
Name Type
frequency
numeric
MINimum selects 0 Hz.
MAXimum selects the current reference oscillator frequency multiplied by
0.468749999767.
The above values bound the legal range for
Executable when initiated: Query form only
Coupled command: Yes
Related Commands:
SOURce:FUNCtion:SHAPe
*RST Condition:
Setting the waveform frequency
FREQ 1E3
[SOURce:]FREQuency:CENTer
center_freq > sets the center frequency
Range of
Values
see below |
MINimum | MAXimum
, as well as the MINimum and MAXimum values,
SOURce:FREQuency:MODE
,
SOURce:ROSCillator
SOURce:FREQuency:CENTer 7.5 MHz
Set center frequency to 1000 Hz
frequency >
Range of
Values
see below |
MINimum | MAXimum
frequency
.
SOURce:FREQuency:MODE
,
SOURce:ROSCillator
SOURce:FREQuency:FIXed 10 kHz
Set frequency to 1000 Hz
HP E1340A Command Reference
Default
Units
Hz
, , ,
SPAN STARt
selects the non-swept
Default
Units
Hz
,
155