Table of Contents
Advertisement
Program Type
Introductory
(Chapter 1)
Standard Waveforms
(Chapter 2)
Arbitrary Waveforms
(Chapter 3)
Sweeping and
Frequency-Shift
Keying
(Chapter 4)
220 HP E1340A Useful Tables
Table B-1. HP E1340A Example Program Listing
Program Name
SLFTST
HP IBASIC, C,
QuickBASIC
RSTCLS
LRN
ERRORCHK
RSTSINE
HP IBASIC, C,
QuickBASIC
DCVOLTS
HP IBASIC, C,
QuickBASIC
SINEWAVE
RAMPWAVE
OUTPUNIT
ARB_GEN
HP IBASIC, C,
QuickBASIC
MULSEG
ARB_HOP
ROM_DOWN
SIN_D
CHARGE
SPIKES
SIN_R
SMPLSWP1
HP IBASIC, C,
QuickBASIC
SMPLSWP2
SWP_PVST
FSK1
Language
E1340A Self Test.
"
Resetting and clearing the AFG.
"
Power-on/reset configuration.
HP IBASIC
Error checking program.
Sine wave output from reset settings.
+5V DC voltage.
"
1kHz, 5Vp sine wave.
"
4V,10 kHz negative-going ramp.
"
Sets amplitude units to volts peak-to-peak.
Procedure for generating an arbitrary
waveform (0 to 5V ramp waveform).
"
Arbitrary waveform with two segments.
"
Selects between two waveforms based on
the level of the signal on the 'Aux In' BNC.
"
Downloads a waveform to waveform
segment memory from the waveform
EPROM.
"
Damped sine wave arbitrary waveform.
"
Exponential charge/discharge wpaveform.
"
Sine wave with spikes.
"
1/2 wave rectified sine wave.
0 Hz to 1 MHz sweep using start and stop
frequencies.
"
1 kHz to 21 kHz sweep using start and
span frequencies.
"
Setting the sweep time (5 kHz to 15 kHz in
0.5 seconds).
"
Frequency-shift keying.
Description
Appendix B
Advertisement
Table of Contents
