Operation |Questionable :Condition; Operation |Questionable :Enable; Operation|Questionable; Condition - HP E1340A User Manual

STATus:OPERation |QUEStionable :CONDition?
:OPERation
|QUEStionable

:CONDition?

Comments
Example
:OPERation
|QUEStionable

:ENABle

Parameters
Comments
Example
182 HP E1340A Command Reference
STATus:OPERation|QUEStionable:CONDition?
the appropriate Condition Register. Reading the register does not affect its
contents.
Executable when initiated: Yes
Coupling group: none
Related commands:
*RST Condition: all bits of both Condition Registers are cleared as
a result of the state present after
Querying the Operation Condition Register
STAT:OPER?
STATus:OPERation|QUEStionable:ENABle <
bits of the associated Event Register are included in its summary bit. The
summary bit is the bit-for-bit logical AND of the Event Register and the
unmasked bit(s).
Parameter Parameter
Name Type
unmask numeric or
non-decimal
numeric
The non-decimal numeric forms are the #H, #Q, or #B formats specified by
IEEE-488.2.
Executable when initiated: Yes
Coupling group: none
Related commands:
*RST Condition: unaffected
Power-on Condition:
Setting the Operation Register enable mask
STAT:OPER:ENAB #H0100
returns the contents of
,
STATus subsystem *SRE
*RST .
Query Operation Condition
Register
unmask
Range of
Values
0 through +32767
STATus subsystem , *SRE
STATUS:OPERation|QUEStionable:ENABLE 0
Enable summary on Initiated bit
,
*STB?
specifies which
>
Default
Units
none
, *STB?
Chapter 7