Polarity - HP E1340A User Manual

[SOURce:]MARKer:POLarity

:POLarity

Parameters
Comments
Example
168 HP E1340A Command Reference
[SOURce:]MARKer:POLarity <
signal at the front panel "Aux Out" BNC.
high marker output;
INVerted
Parameter Parameter
Name Type

polarity

discrete
must be selected when
NORMal
"SOURce:ROSCillator"
MARKer:FEED "OUTPut:ZERO"
may be selected when
INVerted
is selected.
Executable when initiated: Query form only
Coupled command: Yes
Related Commands:
*RST Condition:
Setting the "Aux Out" BNC polarity
MARK:FEED "SWE"
MARK:POL INV
polarity > selects the polarity of the marker
NORMal
an active low output.
Range of
Values
INVerted | NORMal
MARKer:FEED "SEGMent"
is selected.
INVerted
is selected. Either
MARKer:FEED "[SOURce:]SWEep"
SOURce:MARKer:FEED
SOURce:MARKer:POLarity NORMal
Generate marker pulse at start of
sweep
Set active low output
polarity selects an active
Default
Units
none
or
must be selected when
and
NORMal
Chapter 7