Korg MMT microKORG XL+ Owner's Manual page 76

Synthesizer / vocoder
Table of Contents

Advertisement

microKORG XL+
LFO SHAPE ..........................................................................[–63...+63]
 p. 66 "LFO.SHAPE"
KEY SYNC (LFO KeySync) ............................................................[OFF, ON]
Specifies whether the LFO will be reset by note-on.
 p. 67 "KEY SYNC (LFO KeySync)"
INI.PHASE (LFO Init Phase) ...................................................[000...180°]
Sets the starting location of the waveform.
This parameter will be displayed and can be set if "KEY SYNC" is ON.
NOTE
 p. 67 "INI.PHASE (LFO Init Phase)"
LFO.SPRD (LFO Spread) ...................................................[–180...+180°]
Sets the LFO phase difference between the left and right channels.
14. PHASER (Stereo Phaser)
This effect creates a swell by shifting the phase. You can add spread to the
sound by offsetting the phase of the left and right LFOs from each other.
Stereo In - Stereo Out
Left
Right
LFO
LFO Shape
DRY/WET ......................................................["DRY", 99:1...1:99, "WET"]
Sets the balance between the effect and dry sounds.
TYPE..................................................................................[BLUE, U_VB]
Selects the phaser type.
MANUAL
..........................................................................[000...127]
Sets the frequency to which the effect is applied.
76
Dry / Wet
Phaser
Resonance
High Damp
Phaser
Dry / Wet
LFO Spread
MOD.DEPTH (Modulation Depth)
Sets the depth of LFO modulation.
RESO (Resonance)
........................................................... [000...127]
Sets the resonance amount.
PHASE.......................................................................................... [+, –]
Switches the phase of the output and feedback.
LFO SYNC (LFO Tempo Sync) .......................................................[OFF, ON]
Specifies whether the LFO cycle will be synchronized with the tempo speci-
fied by the [TEMPO] knob or MIDI clock.
 p. 66 "LFO SYNC (LFO Tempo Sync)"
LFO FREQ (LFO Frequency)
......................................... [0.01...100.0Hz]
Sets the LFO speed.
 p. 66 "LFO FREQ (LFO Frequency)"
SYNC.NOTE (LFO Sync Note)
..............................................[8/1...1/64]
Sets the LFO frequency as a proportion of the tempo set by the [TEMPO]
knob.
This parameter will be displayed and can be set if "LFO SYNC" is ON.
NOTE
 p. 66 "SYNC.NOTE (LFO Sync Note)"
LFO WAVE (LFO Waveform)................ [SAW, SQUARE, TRIANGLE, SINE, S&H]
Selects the LFO waveform.
 p. 66 "LFO WAVE (LFO Waveform)"
LFO.SHAPE ......................................................................... [–63...+63]
 p. 66 "LFO.SHAPE"
KEY SYNC (LFO KeySync).............................................................[OFF, ON]
Specifies whether the LFO will be reset by note-on.
 p. 67 "KEY SYNC (LFO KeySync)"
INI.PHASE (LFO Init Phase) .................................................. [000...180°]
Sets the starting location of the waveform.
This parameter will be displayed and can be set if "KEY SYNC" is ON.
NOTE
 p. 67 "INI.PHASE (LFO Init Phase)"
...................................... [000...127]

Advertisement

Table of Contents
loading

This manual is also suitable for:

Microkorg xl+

Table of Contents