Table of Contents
Advertisement
microKORG XL+
CLOCK............................................. [AUTO, INTERNAL, EXT USB, EXT MIDI]
Specifies how the microKORG XL+ will synchronize with an external MIDI
device (sequencer, rhythm machine, etc.). If the LFO 1/2 or delay effect
"BPM SYNC" is On, the LFO rate and delay time will also synchronize in
the same way as the arpeggiator.
AUTO: The microKORG XL+ will automatically function using the External
(or USB) setting if MIDI clock messages are being received from an exter-
nal MIDI device connected to the MIDI IN connector. If no MIDI clock mes-
sages are being received, the internal setting will be used.
INTERNAL: The arpeggiator will sync to the internal clock (specified by
knob [TEMPO]). Select this setting if you are using the microKORG XL+
by itself, or if you are using the microKORG XL+ as the master (controlling
device) so that an external MIDI device will synchronize to the MIDI clock
messages from the microKORG XL+.
EXT USB: The microKORG XL+'s arpeggiator will synchronize to the MIDI
clock messages received from an external USB MIDI device connected to
the USB connector.
EXT MIDI: The microKORG XL+'s arpeggiator will synchronize to the MIDI
clock messages received from an external MIDI device connected to the
MIDI IN connector.
When sync'ing to an external MIDI device, refer to that device's owner's
NOTE
manual.
MIDI FLT (MIDI Filter)
Here you can adjust the the microKORG XL+'s MIDI Filter settings.
PROG CHG (Program Change) ......................................[DISABLE, ENABLE]
Selects whether program changes will be transmitted and received.
DISABLE: Program changes will not be transmitted or received.
ENABLE: Program changes will be transmitted and received.
CTRL CHG (Control Change)..........................................[DISABLE, ENABLE]
Selects whether MIDI control changes will be transmitted and received.
DISABLE: MIDI control changes will not be transmitted or received.
ENABLE: MIDI control changes will be transmitted and received.
P.BEND (Pitch Bend) ...................................................[DISABLE, ENABLE]
Selects whether pitch bend messages will be transmitted and received.
DISABLE: Pitch bend messages will not be transmitted or received.
ENABLE: Pitch bend messages will be transmitted and received.
60
SYS EX (System Exclusive) ............................................[DISABLE, ENABLE]
Selects whether MIDI system exclusive messages will be transmitted and
received.
DISABLE: MIDI system exclusive messages will not be transmitted or
received.
ENABLE: MIDI system exclusive messages will be transmitted and
received.
MIDI.CTRL (MIDI Control)
In this page you can specify the function that is assigned for modulation
sources MIDI1, MIDI2, and MIDI3 used in a virtual patch.
If the selected function is assigned to a different parameter, an asterisk
NOTE
"*" is shown at the right of the value.
MIDI1.SRC
.... [P.BEND...#119, #016+/–, #017+/–, #019+/–, #020+/–, #021+/–]
Selects the function that will be assigned to modulation source MIDI1 used
in a virtual patch. The factory-set default setting is CC#16.
MIDI2.SRC
.... [P.BEND...#119, #016+/–, #017+/–, #019+/–, #020+/–, #021+/–]
Selects the function that will be assigned to modulation source MIDI2 used
in a virtual patch. The factory-set default setting is CC#02.
MIDI3.SRC
.... [P.BEND...#119, #016+/–, #017+/–, #019+/–, #020+/–, #021+/–]
Selects the function that will be assigned to modulation source MIDI3 used
in a virtual patch. The factory-set default setting is A.TOUCH (aftertouch).
Advertisement
Table of Contents
