Korg MMT microKORG XL+ Owner's Manual page 74

microKORG XL+
SATURATN (Tape Saturation)
Sets the distortion amount.
WOW.FREQ (Wow Flutter Frequency) ............................. [0.01...100.0Hz]
Sets the frequency at which pitch variation will occur in Hz steps.
WOW.DEPTH (Wow Flutter Depth) .........................................[000...127]
Sets the depth of pitch variation.
PRE TONE.............................................................................[000...127]
Sets the tone of the input.
SPREAD ...............................................................................[000...127]
Sets the width of the stereo image of the effect sound.
 p. 71 "SPREAD"
11. CHORUS (Stereo Chorus)
This effect adds thickness and warmth to the sound by modulating the
delay time of the input signal. You can add spread to the sound by offsetting
the phase of the left and right LFOs from each other.
Stereo In - Stereo Out
Left
Trim
Trim
Right
LFO
DRY/WET ......................................................["DRY", 99:1...1:99, "WET"]
Sets the balance between the effect and dry sounds.
MOD.DEPTH (Modulation Depth)
Sets the depth of LFO modulation.
74
.............................................[000...127]
Dry / Wet
HEQ
Chorus
HEQ
Chorus
Dry / Wet
LFO Spread
.......................................[000...127]
LFO FREQ (LFO Frequency) ......................................... [0.01...100.0Hz]
Sets the LFO speed. Increasing this value will result in a faster frequency.
LFO SPRD (LFO Spread)...................................................... [–180...180°]
Sets the LFO phase difference between the left and right.
PRE DLY L, PRE DLY R(Pre Delay L, Pre Delay R) ................. [00.0...50.0ms]
Sets the delay times for the left and right channels.
TRIM................................................................................... [000...127]
Sets the input level.
HI.EQ.GAIN (High EQ Gain) ..........................................[–15.0...+15.0dB]
Sets the gain of High EQ.
12. FLANGER (Stereo Flanger)
This effect gives a significant swell and movement of pitch to the sound. It
is more effective when applied to a sound with a lot of harmonics. This is a
stereo flanger.
Stereo In - Stereo Out
Left
Right
LFO Shape
LFO
DRY/WET...................................................... ["DRY", 99:1...1:99, "WET"]
Sets the balance between the effect and dry sounds.
DELAY ....................................................................... [00.0...30.0ms]
Sets the delay time in millisecond steps.
MOD.DEPTH (Modulation Depth)
Sets the depth of LFO modulation.
Dry / Wet
Flanger
Feedback
High Damp (Type: Flanger)
Flanger
Dry / Wet
LFO Spread
...................................... [000...127]