Korg MMT microKORG XL+ Owner's Manual page 66

Synthesizer / vocoder
Table of Contents

Advertisement

microKORG XL+
FLT TYPE (Filter Type).............................................................................
[LPF24 (–24dB/oct), LPF18 (–18dB/oct), LPF12 (–12dB/oct), HPF12
(–12dB/oct), BPF12 (–12dB/oct)]
Selects the filter type.
 p. 42 "TYPE BAL (Filter1 Balance)"
CUT OFF
...........................................................................[000...127]
Sets the filter cutoff frequency.
 p. 42 "CUTOFF (Filter1 Cutoff)"
RESO (Resonance) .............................................................[000...127]
Sets the filter resonance amount.
 p. 42 "RESO (Filter1 Resonance)"
TRIM ...................................................................................[000...127]
Sets the input level.
MOD SRC (Modulation Source) ................................................ [LFO, CTRL]
Selects the modulation source that will control the cutoff frequency.
If you set this to LFO, the LFO will modulate the cutoff frequency.
If you set this to CTRL, the control source selected by "CTRL SRC" will
control the cutoff frequency.
MOD INT (Modulation Intensity)
Adjusts the depth of modulation applied by the modulation source.
RESPONSE (Modulation Response)
Adjusts the response of the modulation effect.
A setting of 0 produces slow response.
LFO SYNC (LFO Tempo Sync) ....................................................... [OFF, ON]
Specifies whether the LFO cycle will synchronize to the tempo set by the
[TEMPO] knob or by MIDI clock.
If this is Off, the LFO will operate at the cycle specified by "LFO Freq."
If this is On, the LFO will synchronize to the tempo or MIDI clock.
This parameter will be displayed and can be set if "MOD INT" is LFO.
NOTE
In the Global mode MIDI page "CLOCK" setting is Internal, the LFO will
NOTE
synchronize to the tempo specified by the [TEMPO] knob. If the setting is
External, the LFO will synchronize to the MIDI clock received from an ex-
ternal MIDI device.
66
......................................[–63...+63]
....................................[000...127]
LFO FREQ (LFO Frequency)
......................................... [0.01...100.0Hz]
Sets the LFO speed.
Increasing this value will result in a faster frequency.
This parameter will be displayed and can be set if "MOD SRC" is LFO
NOTE
and "LFO SYNC" is Off.
If this parameter is assigned to "CTRL-1," or "CTRL-2," switching
"LFO SYNC" on will change the asaignment to "SYNC.NOTE."
SYNC.NOTE (LFO Sync Note)
..............................................[8/1...1/64]
Sets the LFO frequency as a proportion of the tempo set by the [TEMPO]
knob.
The length of the specified value (note value) relative to the tempo will be
one cycle of the LFO. For example if this is 1/4, one cycle will occupy one
quarter note.
For example if this is set to 1/4, the LFO cycle will be one beat long. If this is
set to 3/4, the LFO cycle will be three beats long.
This parameter will be displayed and can be set if "MOD SRC" is LFO
NOTE
and "LFO SYNC" is On.
If this parameter is assigned to "CTRL-1" or "CTRL-2," switching
"LFO SYNC" Off will change the assignment to "LFO FREQ."
LFO WAVE (LFO Waveform)................ [SAW, SQUARE, TRIANGLE, SINE, S&H]
Selects the LFO waveform.
This parameter will be displayed and can be set if "MOD SRC" is LFO.
NOTE
SAW
SINE
LFO.SHAPE ......................................................................... [–63...+63]
Adjusts the shape of the LFO waveform.
This parameter will be displayed and can be set if "MOD SRC" is LFO.
NOTE
SQUARE
TRIANGLE
S&H
Amplitude changes irregularly
(Sample & Hold)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Microkorg xl+

Table of Contents