Table of Contents
Advertisement
2-12. How to copy a belt loop pattern number
It is possible to copy the sewing data of a registered belt loop pattern number can be copied to an un-
registered belt loop pattern number. Overwrite copy of the belt loop pattern number is prohibited. If you
want to overwrite a belt loop pattern number, it is necessary to delete the pattern number you do not
need in advance.
→ Refer to
"@-2-11. How to select a belt loop pattern number",
A
B
D
E
F
1 Displaying the data entry screen
Only on the belt loop individual sewing data entry screen (blue)
on which the pattern button is selected, the belt loop pattern
number can be copied. If the sewing screen (green), is dis-
played, press the set ready key
screen (blue).
2 Bringing up the pattern copy screen
When you press pattern copy button
ton copy (selection of the source pattern to be copied) screen
is displayed.
3 Selecting a copy source pattern number
Select a copy source belt loop pattern number from belt loop
pattern number list button B .
Then, when you press copy destination entry button
the copy destination entry screen is displayed.
C
4 Entering a copy destination pattern number
Enter a copy destination belt loop pattern number using nu-
meric keys D . It is also possible to search for an unused belt
loop pattern number using +/- buttons
5 Starting copying
Press enter button
tern number. The screen will return to the belt loop pattern No.
G
copy (copy source selection) screen with the copied belt loop
pattern No. being selected.
*
It is also possible to copy the cycle sewing data following the
similar procedure.
– 49 –
p.47.
to display the data entry
A , the pattern but-
G to start copy of the belt loop pat-
C ,
( F , E ).
Advertisement
Table of Contents
