Table of Contents
Advertisement
2-32. Performing formatting of the media
To re-format a medium, the IP-420 has to be used. The IP-420 is not able to ready any medium which is
formatted on a personal computer.
A
1 Display the media format screen
When
switch is held pressed for three seconds, MEDIA
FORMAT button
this button is pressed, the media format screen is displayed.
2 Start formatting of the media
Set the media you desire to format to the media slot, close
the cover, press ENTER button
Save necessary data in the media to the other media before
formatting. When formatting is performed, the inside data are
deleted.
When two or more media are connected to the sewing
machine, the medium to be formatted is determined by
B
the predetermined priority order.
High
C�(TM) slot ← USB device 1 ← USB device 2 ← ...
When a C� (TM) is inserted in the C� (TM) slot, the
Compact�lash (TM) will be formatted according to the
priority order as shown above.
Refer to the USB specifications for the priority order of
access.
– 99 –
A is displayed on the screen. When
B and formatting starts.
Low
←
Advertisement
Table of Contents
