Table of Contents
Advertisement
3-5. Assembling the thread stand and installing on the machine
1
3-6. Installing the machine head support bar
1
3-7. Installing the operation panel IP-420
2
1
2
– 11 –
Insert the thread stand in the hole in table 1 and
fix by fastening a washer and a nut placed on the
top and underside of table.
Securely mount machine head support bar includ-
ed in the accessories supplied with the unit.
Drive machine head support bar 1 in hole 2 in
the machine table.
When tilting the sewing machine, tilt
the sewing machine slowly so that no
excessive force will be applied to the
head support bar.
And when returning the sewing ma-
chine back to its original position,
be careful not to have your hand get
caught between the base and the sew-
ing machine bed.
Open the cover on right side face 2 section of
the IP-420 and connect the connector of cable 1
which is secured with adhesive tape on the upper
right face of the table to the IP-420.
To protect the operation panel IP-420
from malfunctioning due to static
electricity, mount the operation panel
on the operation panel base.
Advertisement
Table of Contents
